Tag Data Link Setting Methods - Omron MicroHAWK F440-F Series User Manual

3 Controlling Operation and Data Output with Ethernet
3-1-5

Tag Data Link Setting Methods

This section describes how to set data links for EtherNet/IP.
The communications areas in the PLC for which data links to the smart camera are created are speci-
fied as tags and tag sets, and the connections are set for tag data link communications.
Precautions for Correct Use
When connecting to an NJ-series or CJ-series CPU Unit, install the EDS file that defines the
connection information for the smart camera in to Sysmac Studio.
Download the EDS file from OMRON's website.
Tags, Tag Sets, and Connection Settings
The tag data link data for the smart camera has been assigned to global variables in the Controller.
Assembly list
Assembly name
INPUT320
OUTPUT320
*1. For details, refer to 3-1-7 Status and Control Signals for Each Input and Output Assembly on page 3-14.
Tag Sett Settings
Seting item
Input
Tag set name
Size
Output
Tag set name
Size
Conection Settins
Setting item
Input
Target variable
Size (Target variable)
Originator variable
Size (Originator variable)
Connection type
RPI (Requested Packet Interval)
Timeout
Output
Target variable
Size (Target variable)
3-12
In-
Input / Size
ttance
Output (byte)
ID
Input 320 102
Output 320 114
Tag set name in the PLC
•
320 bytes
Tag set name in the PLC
•
320 bytes
INPUT320, Instance102
•
320 bytes
Variable defined on the PLC
•
320 bytes
Point to Point connection
10 ms to 3.2 s
20 ms or more is recommended.
RPI × (4 to 512) (Default: RPI × 4 )
OUTPUT320, Instance114
•
320 bytes
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)
Assembly information
This is the standard input assembly.
This is the standard output assembly.
Description
Description
Details
of data
struc-
ture
*1