2 Controlling Operation and Data Output with Parallel
2-1-4
Change the Type of Trigger
It is possible to change the Input method for the trigger used by the Smart Camera to execute Image
capture. For details, refer to the AutoVISION Software Help.
Setting item
Trigger
2-6
I/O Type
Option
•
None
Trriger Po-
larity
Low-> High
High->Low
•
Trriger De-
lay
•
Digital
Trriger Po-
larity
Low-> High
High->Low
•
Trriger De-
lay
•
Virtual
Trriger Po-
larity
Low-> High
High->Low
•
Trriger De-
lay
•
Sensor
Trriger Po-
larity
Low-> High
High->Low
•
Trriger De-
lay
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)
Description
Use this option to perform
continuous measurement
based on internal timing.
Use this option to update the
decode tool's match string
while entering a measurement
trigger.
Use this option to perform
measurement based on the
measurement trigger generat-
ed in the smart camera. It is
for testing.
Select this option to use an in-
dustrial protocol (Ethernet/IP,
etc.) and prallel tigger signal
for measurement trigger input.
Example