Setting Item
Baud Rate
Data Bits
Parity
Stop Bit
Flow Control
4-1-4
Output Settings
Example: Output a string that you read using the Decode Tool.
• Register the read string in the Decode Tool.
• Open the "TCP/IP and Serial Out" settings in the Test Outputs Tool.
• Select the port to use for string output.
• Click the+ icon in the Build Output String area and then select the Tool Output Value option.
• Click <Not Connected> in the Build Output String area.
Select the Decode Text option of the Decode Tool.
• Use any serial communication tool to configure the port, and other settings and then connect to the
F440-F/F430-F.
• Input the measurement trigger to the F440-f/F430-F.
• The F440-F/F430-F outputs the read string (decoded text) to the serial communication tool.
4-1-5
Serial Command List (RS-232C)
See A-3 Serial Command on page A-4 for serial command.
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)
4 Controlling Operation and Data Output with RS-232C
Setting Value
110, 300, 1200,
Set the transmission speed for RS-232C communications.
2400, 4800, 9600,
(Unit:bps)
19200, 38400,
Set it to match the communications specifications of the ex-
57600, 115200
ternal device.
(Default: 115200)
•
5
Length of the data bits. Select eight or seven.
•
Set it to match the communications specifications of the ex-
6
•
ternal device.
7
•
8 (dafault)
•
An error detection routine that sets 1 data bit per character to
None(default)
•
1 or 0 so that the total number of bits in the data field is even
Odd
•
or odd.
Even
Set it to match the communications specifications of the ex-
ternal device.
•
1 (default)
1 or 2 bits appended to the end of the data per each charac-
•
ter to indicate End of the data.
2
Set it to match the communications specifications of the ex-
ternal device.
•
Set the parameters for the flow control to use.
None
•
Set it to match the communications specifications of the ex-
Xon/Xoff
•
ternal device.
Hardware
Description
4
4-5