Communication Control Software Users Guide; Requirement Software And Jig Tool; Connecting Configuration; Communication Settings - Omron STC-S133 Series Manual

6

Communication control software users guide

6.1

Requirement software and JIG tool

1) +12V DC power supply UN310-1210
2) Remote controller will be supported
3) Communication tool (PC can communicate through USB port) JIG-USB2
4) Cable (Camera to JIG-USB2) KSAF003
5) Control software KSACtrl
6.2

Connecting configuration

Please refer to
6.3

Communication settings

UART (RS232C compliant), Binary communication
Baud rate
Data bit
Parity
Stop bit
Flow control
STC-S133 Series
Specifications
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
another chapter.
115,200bps
8bits
None
1bit
None
No.16S061-09
19/55