Communications Test; Serial Command List - Omron MicroHAWK F440-F Series User Manual

3 Controlling Operation and Data Output with Ethernet
6
Select the "Decode Text" option of the Decode Tool.
3-2-6

Communications test

1
Use any TCIP/IP Tool to configure the IP address, port, and other settings, and then connect to
the smart camera.
2
Input the measurement trigger to the smart camera.
3
The smart camera outputs the read string (decoded text) to the TCP/IP tool.
3-2-7

Serial command list

Refer to A-3 Serial Command on page A-4 for serial commands.
3-38
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)