3 Controlling Operation and Data Output with Ethernet
3-2-3
Communications Setup Procedures
The following settings are required to communicate with Serial (TCP).
1. Communications speci-
fications settings
2. Output data settings
3. Communications test
3-30
···
The communications specifications are set.
For deatails, refer to 3-2-4 Communications specifications settings
( Serial (TCP)) on page 3-31.
↓
···
Set output data.
For details, refer to 3-2-5 Output data settings on page 3-36.
↓
···
Check the communicationssetup.
For details, refer to 3-2-6 Communications test on page 3-38.
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)