Chapter 1: Overview
32
The AT-GS950/48PS SFP LEDs are located between the upper and lower
SFP slots. See Figure 17.
Figure 17. AT-GS950/48PS SFP Status LEDs
Table 6 describes the Link LEDs for the SFP slots on the AT-GS950/
10PS, AT-GS950/16PS, AT-GS950/48PS switches.
Table 6. SFP Slot LED Functional Descriptions - AT-GS950/10PS,
AT-GS950/16PS, AT-GS950/48PS
LED
State
Off
Blinking
Green
Steady
SFP
Green
Blinking
Amber
Steady
Amber
Table 7 on page 33 describes the Link LEDs for the SFP slots on the
AT-GS950/28PS switch.
Description
The port on the SFP transceiver has not
established a link with an end node or the
transceiver slot is empty.
The SFP transceiver is transmitting or
receiving network packets at 1000 Mbps.
The SFP transceiver has established a link
with a network device at 1000 Mbps, but is
not transmitting or receiving network packets.
The SFP transceiver is transmitting or
receiving network packets at 100 Mbps.
The SFP transceiver has established a link
with a network device at 100 Mbps, but is not
transmitting or receiving network packets.
Speed and
Link/Activity
SFP LEDs