Advertisement
Tillage Rotor
15. Orient the Bearing Shield cup outward. Place the
appropriate Spacer, Bearing Shield, and 11ga
Washer on the Tillage Rotor Shafts.
16. Apply anti-seize on the Tillage Rotor Shafts. Install LH
and RH Swing Arms onto Drive Rotor and Tillage
Rotor Shafts.
17. RH side, place a 1.785 x 11ga Washer on the Drive
and Tillage Rotor Shafts. Install #80-2 Sprockets and
1/2" Keys onto Rotors. Larger Sprocket is on the Drive
Rotor.
18. RH side, secure the Drive and Tillage Rotors by
installing 3/4-10 x 2 Bolts, Lock Washers, and 3/4 x 3
x 3/8 Washers on the end of the Rotor Shafts.
19. LH side, secure the Drive and Tillage Rotor Shafts by
installing 3/4-10 x 2 Bolts, Lock Washers, 3/4 x 2-1/16
x 3/8 Washers, and Flat Top Washers on the end of
the Rotor Shafts.
F-1097-2305
TABLE OF CONTENTS
Rockshaft
Link
U-Shape
Support Plate
Spacer,1.563 x
2.000 x 3.188
Shield,1-1/2
Figure 4-13: Tillage Rotor Blade Repair - RH Side
LH Swing
Arm
Washer,
Lock 3/4
Washer,
3/4 x 2-1/16 x 3/8
Washer,
1.547 ID x 11ga
Bearing
20. Install Rotor #80-2 Drive Chain. Adjust Chain
Tension. See "Chain Tension" on page 4-12.
21. Install chain access Cover to the RH Swing Arm.
22. Install Rotor Drive Chain Shield.
23. Insert the Gauge Wheel Hub and Spindle into the
Gauge Wheel Arm with 3/8-16 x 2-1/2 Bolts and
Locknuts.
24. Attach LH and RH Rockshaft Links to the Swing Arms
with 5/8-11 x 1-3/4 Bolts and Lock Washers.
25. Fill LH and RH Tillage Rotor Air Shocks with air. See
"Air Shock" on page 3-6.
MAINTENANCE
Gauge
Wheel Arm
Washer,
Flat Top
Bolt,
3/4-10 x 2
Front
4-11
Advertisement
