MAINTENANCE
Lubrication
The Till 'N Seed is equipped with maintenance free
Bearings. These areas require no lubrication.
•
Grease Lift Wheel Hubs and Gauge Wheel Hubs
every 50 hrs. See Figure 4-3.
•
Grease Rockshaft Bearings every 8 hrs. See
Figure 4-3.
Wheel Hub
Repack Annually
50
Hrs
8
Hrs
Rockshaft
4-4
TABLE OF CONTENTS
•
•
•
Lift Tire and Wheel
Assembly
Rockshaft
Bearing
Figure 4-3: Lubrication Maintenance
Oil #80-2 Roller Chain immediately after each use
while chain is still warm for best penetration. See
Figure 4-4.
Oil #40 and #60 Roller Chains periodically. See
Figure 4-4.
When the Machine is not used for some time,
exposed portions of the Hydraulic Cylinder Rods must
be cleaned and covered with a thick coat of grease to
prevent corrosion, which will damage the seals.
Wheel Hub
Repack Annually
Gauge Wheel
Tire and Wheel
Assembly
50
Hrs
F-1097-2305