Advertisement
ASSEMBLY
3-PT Hitch
The 3-PT Model Till 'N Seed comes shipped completely
assembled.
1. Untie the 7-Pin Harness from the Till 'N Seed Frame
Tube. See Figure 2-1.
2. Connect 7-Pin Plug into Tractor and check Warning
Lamp functions.
3. Bundle and secure harnesses with tie wraps.
IMPORTANT
Cords are marked Yellow Tape for Left and Green
Tape for Right.
2-2
TABLE OF CONTENTS
Lamp Wishbone
Harness
7-Pin Harness,
10Ft
Figure 2-1: 3-PT Hitch Installation
IMPORTANT
All harnesses must be firmly attached to machine
frame members, so they don't sag or become torn
loose by field debris. Use the tie wraps provided.
Check to be sure the harnesses at center of machine
is slack enough so as not to be stretched or
interfered with while lowering from transport to field
working position and vice versa.
4-Prong
Connector
3-PT Hitch
F-1097-2305
Advertisement
