Advertisement
Safety Instructions for Towing
Vehicles
The maximum travel speed is the lesser of
• The limit of the road conditions;
• The maximum specified ground speed;
— for towing operations as indicated in this manual
or SIS;
— of the towed vehicle as indicated in its operator's
manual, SIS, or information sign;
• The maximum ground speed of the towed equipment
combination shall be limited to the lowest specified
ground speed of any of the towed machines. This
speed is the ground speed limitation.
EXAMPLE: If the tractor is capable of 25 mph, the first
implement has a SIS for 19 mph, and the last
implement's operator's manual states its specified
ground speed is 15 mph, the towed equipment
combination ground speed limitation is 15 mph.
Attaching, Detaching and Storage
•
Do not stand between the tractor and implement
when attaching or detaching implement unless both
are blocked from moving.
•
Before applying pressure to the hydraulic system, be
sure all connections are tight and that hydraulic hoses
are not damaged.
•
Completely raise machine and install transport locks. If
desired to store lowered and on unpaved surface,
place hardwood blocks under roller to keep off ground.
•
Block implement so it will not roll when unhitched from
the tractor.
•
Relieve pressure in hydraulic lines before uncoupling
hydraulic hoses from tractor.
•
Use a Safety Chain to help control drawn machinery
should it separate from the tractor drawbar.
NOTE
To relieve hydraulic pressure: Depending on tractor
hydraulic system, some can be relieved by actuating
control lever after engine is stopped. If tractor has electric
over hydraulic controls, it may be necessary to move the
control lever to the float position with engine running.
Refer to Tractor's Operator's Manual.
Wear protective gloves and safety glasses or goggles
when working with hydraulic systems.
Maintenance Safety
• Block the implement so it will not roll when working on
or under it to prevent injury.
• Do not make adjustments or lubricate the machine
while it is in motion.
F-1097-2305
TABLE OF CONTENTS
• Make sure all moving parts have stopped.
• Keep all guards in place. Replace any that become
damaged.
• Understand the procedure before doing the work. Use
proper tools and equipment.
Air Shock Safety
•
Wear protective gloves and safety glasses or goggles
when working with the Air Shock.
•
The pressurized Air Shock may violently extend if
disconnected from the machine. Release air pressure
prior to removing.
Protective Equipment
• Wear protective clothing & equipment appropriate for
the job. Avoid loose fitting clothing.
• Because prolonged exposure to loud noise can cause
hearing impairment or hearing loss, wear suitable
hearing protection, such as earmuffs or earplugs.
Prepare for Emergencies
• Keep a First Aid Kit and Fire Extinguisher handy.
• Keep emergency numbers for the doctor, ambulance,
hospital and fire department near the phone.
Tire Safety
Tire changing can be dangerous and should be
performed by trained personnel using correct tools and
equipment.
• When inflating tires, use a clip-on chuck and extension
hose long enough to allow you to stand to one side, not
in front of or over the tire assembly. Use a safety cage
if available.
• When removing and installing wheels use
wheel-handling equipment adequate for the weight
involved.
Chemical Safety
Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil &
property.
• Read chemical manufactures instructions and store or
dispose of unused chemicals as specified. Handle
chemicals with care & avoid inhaling smoke from any
type of chemical fire.
• Store or dispose of unused chemicals as specified by
the chemical manufacturer.
SAFETY INFORMATION
1-3
Advertisement
