Vl (Firmware Version - Verbose); Vr (Firmware Version - Short) Command; Wa (Active Warning Numbers) Command - Digi XTend User Manual

AT Command: ATTX
0
1
Default Parameter Value: 0
Number of bytes returned: 1

VL (Firmware Version - Verbose)

<Diagnostics> The VL command is used to read the verbose firmware version of the RF module.
AT Command: ATVL
Parameter Range: returns string
Default Parameter Value: 0
Number of bytes returned: 2

VR (Firmware Version - Short) Command

<Diagnostics> The VR command is used to read the firmware version of the RF module.
Note: Firmware versions contain four significant digits - "A.B.C.D". If B=2, the module is programmed for operation in
Australia only.
AT Command: ATVR
Binary Command: 0x14 (20 decimal)
Parameter Range (read-only): 0 - 0xFFFF
Number of bytes returned: 2

WA (Active Warning Numbers) command

<Diagnostics> The WA command reports the warning numbers of all active warnings - one warning number per line.
No further information is shown and warning counts are not reset.
AT Command: ATWA
Parameter Range:Returns string - one
warning number per line.
Sample Output (indicates warnings 1 and 3 are currently active):
XTend RF Module User Guide
TX and RX
TX-only
Command descriptions
1
3
OK
55