Basic Rf Modes; Acknowledged Rf Mode; Peer To Peer Networks; Definition - Digi XTend User Manual

Peer to peer networks

3. Send ATRR 3 to set the number of retries to 3.

Basic RF modes

Streaming, Multi-Transmit, Repeater, and Polling.

Acknowledged RF mode

Acknowledged and Polling.
Peer to peer networks
This following section provides the RF communication type and RF mode for XTend RF Module peer-to-peer
networks.

Definition

In Peer-to-peer networks, RF devices remain synchronized without the use of master/server dependencies. Each
device shares the roles of master and slave. Digi's peer-to-peer architecture features fast synch times (35 ms to
synchronize devices) and fast cold start times (50 ms before transmission).

Sample network profile (Broadcast communications)

Assume the default value for all parameters that are not in this list. These profiles do not reflect addressing
implementations.
Use the default values for all devices.

Sample network profile (Acknowledged communications)

Assume the default value for all parameters that are not in this list. These profiles do not reflect addressing
implementations.
All devices:
1. Send ATMY 0 to set the source address to 0x00.
2. Send ATDT FFFF to set the destination address to 0xFFFF.
3. Send ATRR 3 to set the number of retries to 3.
Basic RF modes
Streaming.
XTend RF Module User Guide 64