Serial Loopback Adapter; Male Db-9 To Rj-45 Adapter - Digi XTend User Manual

Adapters

Serial Loopback Adapter

Part Number: JD2D3-CDL-A (Red, DB-9 M-F)
Use the serial loopback adapter for range testing. During a range test, the serial loopback adapter causes the device
to function as a repeater by looping serial data back into the device for retransmission.
The following image shows the adapter and its pinouts.

Male DB-9 to RJ-45 Adapter

Part Number: JD2D2-CDN-A (Yellow)
This adapter facilitates adapting the DB-9 connector of the Interface Board to a CAT5 cable (male DB9 to female
RJ45).
For connection guidelines, see RS-485 (4-wire) and RS-422 operation on page 98.
The following image shows the adapter and its pinouts.
XTend RF Module User Guide 93