Digi XTend User Manual page 86

Figure 2: EIRP Formula for Australia
Note NOTE: The maximum EIRP for the FCC (United States) and IC (Canada) is 36 dBm.
These modules comply with requirements to be used in end products in Australia. All products with EMC and radio
communications must have a registered RCM mark. Registration to use the compliance mark will only be accepted
from Australian manufacturers or importers, or their agent, in Australia. In order to have an RCM mark on an end
product, a company must comply with a or b below:
a. have a company presence in Australia.
b. have a company/distributor/agent in Australia that will sponsor the import of the end product.
Contact Digi for questions related to locating a contact in Australia.
XTend RF Module User Guide
Australia (RCM) certification
86