Making An Intercom Call (Line Appearance Mode) - AT&T SB67020 User Manual

Making an Intercom Call (Line Appearance Mode)

In Line Appearance mode, your Deskset uses an outside line any time you go off hook by lifting the handset, pressing SPEAKER,
or by some other method. To make an internal (extension-to-extension) call, you must use the Intercom Programmable Feature
Key. By default, key 10 is an Intercom key, but your system administrator can configure additional Intercom keys to give you more
Intercom lines.
To make an intercom call:

Figure 19. Making an
Intercom Call
Figure 20. Active Intercom
Call
Outgoing Calls
Synapse SB67020 Deskset User's Guide
1. With the Deskset in Idle mode and the handset "on hook," do one of the following:
Press the INTERCOM key, lift the handset (the screen shown in Figure 19 appears)

then dial the extension number.
Instead of dialing after lifting the handset, you can press the
the desired extension number, then press SELECT to dial the number.
Dial the extension number, then press the INTERCOM key.

The Deskset dials the extension in Speakerphone mode. To continue the call using the
handset, pick up the handset.
When your Intercom call is answered, the Active Call screen appears, as shown in Figure 20.
36
soft key, highlight