Basic Intercom Operations; Making An Intercom Call Or Page; Answering An Intercom Call Or Page; Ending An Intercom Call Or Page - AT&T 874 User Manual

INTERCOM OPERATION
This intercom features both a single-phone page and a system-wide page.
A single-phone page alerts only one phone; a system-wide page alerts all
phones. Any phone with the Do Not Disturb (DND) feature activated will
not receive a page.
An intercom call or single-phone page automatically activates the
speakerphone on the receiving phone. You can deactivate the speakerphone
by lifting the handset.
Use the first 12 memory buttons to make intercom and page calls. When
using the intercom, these buttons are intercom stations 11 through 22.

Basic Intercom Operations

Any two stations connected to Line 1 can ring each other.
INTERCOM
Lets you "announce" over the speaker of the phone you're
PAGE
calling. The person you've called can respond just by talking.
Lets you "announce" to all 874 phones in the system at the
ALLPAGE
same time.
Lets you connect another intercom call with an outside line.
CONF
Lets you receive an incoming call and redirect it to any 874
TRNSFR
phone on the system.

Making an Intercom Call or Page

1 Lift the handset and press I or p. You'll hear a tone.
2
Press the memory button for the station you're paging
— OR —
Use the keypad to enter the station number.
NOTE: When you direct an intercom call to one station, any station in the
system can answer the call.

Answering an Intercom Call or Page

For an intercom call, press K or I or lift the handset.
For a page, begin talking (the speaker is automatically activated) or lift
the handset.

Ending an Intercom Call or Page

Press K.
22