Volume Settings - AT&T SB67020 User Manual

Volume Settings

Set the Speaker, Receiver, Headset, and Paging volumes using the Volume Settings menu. You can also adjust each of these
volumes while you are on a call by pressing VOL+ and VOL–.
To access the Audio menu:

Volum e Settings
Speaker Volum e: 4
Receiver Volum e: [3]
Save
Figure 193. Speaker
Volume
Volum e Settings
Speaker Volum e: [4]
Receiver Volum e: 3
Save
Figure 194. Receiver
Volume
Volum e Settings
Receiver Volum e: [3]
Headset Volum e: 4
Save
Figure 195. Headset
Volume
Volum e Settings
Headset Volum e: [4]
Paging Volum e: 4
Save
Figure 196. Paging Volume
Deskset Settings
Synapse SB67020 Deskset User's Guide
1. Press MENU, then 2, then 3, and then 3 (Call Appearance mode) or MENU, then 2, then
2, and then 3 (Line Appearance mode) to access the Volume Settings menu, as shown
in Figure 193.
Press the navigation key, and then the

Volume from 1 to 9, as shown in Figure 193. The default is 4.
Press the navigation key, and then the

Volume from 1 to 9, as shown in Figure 194. The default is 3.
Press the navigation key, and then the

Volume from 1 to 9, as shown in Figure 195. The default is 4.
Press the navigation key, and then the

Volume from 1 to 9, as shown in Figure 196. The default is 4.
to accept the adjustments and return to the Deskset Settings menu.
2. Press
or
or
or
or
126
navigation key to set the Speaker
navigation key to set the Receiver
navigation key to set the Headset
navigation key to set the Paging