Basic Intercom Operations; Making An Intercom Call With The Handset - AT&T Four-Line Intercom Speakerphone 955 User Manual

955_00_1ATT CIB #change
INTERCOM OPERATION
This intercom features both a single-phone page and a system-wide page.
A single-phone page alerts only one phone; a system-wide page alerts all
phones. Any phone with the Do Not Disturb (DND) feature activated will
not receive a page.
An intercom call or single-phone page automatically activates the
speakerphone on the receiving phone. You can deactivate the
speakerphone by lifting the handset.
NOTE: If a line is in use, pressing I or p will place the line on
hold and activate the intercom.

Basic Intercom Operations

INTERCOM
PAGE
PAGE ALL
CONFERENCE Lets you connect another intercom call with an outside line.

Making an Intercom Call with the Handset

1 Press I and lift the handset. The screen displays:
2 Dial the extension number of the party you wish to reach. If that
extension is idle, you will hear long beeps. If that extension is
busy, you will hear a busy signal. If that extension is set to Do Not
Disturb, you will hear short beeps.
NOTE: The intercom call is automatically cancelled if you do not dial
an extension within 10 seconds.
NOTE: When you direct an intercom call to one extension, any
extension in the system can answer the call.
40
10/24/02 9:48 AM
Any two stations connected to Line 1 can ring each other.
Lets you "announce" over the speaker of the phone you're
calling. The person you've called can respond just by
talking.
Lets you "announce" to all 955 phones in the system at the
same time (system-wide page).
Page 40