Programmable Feature Keys - AT&T SB67020 User Manual

Programmable Feature Keys

The SB67020 Deskset has ten Programmable Feature keys as shown in
a Call Appearance, and is not programmable. Your system administrator can program the other nine keys to be used as Call
Appearances, function keys, or Quick-Dial keys. See
In Line Appearance mode, key 10 is an Intercom key, and is not programmable. Press this key to call another extension. Your
system administrator can program the other nine keys to access external lines or for other functions, including Quick Dial.
Table 5 lists the default functions for the Programmable Feature keys for both operation modes (non-programmable keys are
shaded in gray). Your key assignments may be different. The keys include two-color LEDs to signal the status of some functions.
Table 5. Programmable Feature Key Default Functions
Call Appearance Mode
Key Function Label
1 Call 1
2
Call 2
3
Park List
4
Page
5
Do Not Disturb
6
Call Forward All
7
Redial
8
Directory
9
Call Log
10
Messages
Overview
Synapse SB67020 Deskset User's Guide
"Quick Dial" on page 144
For more information, see...
"Call Indicators" on page 19
"Accessing the Park List" on page 60
"Sending a Page" on page 108
"Using Do Not Disturb (DND)" on
page 134
"Call Forward All and Call Forward–No
Answer" on page 120
"Accessing the Redial List" on page 67
"Using the Directory" on page 74
"Using the Call Log" on page 102
"Voicemail Overview" on page 83
Figure 3 on page
to add Quick Dial entries.
Line Appearance Mode
Function Label For more information, see...
Line 1 "Line Appearance Mode" on page 16
Line 2
Line 3
Line 4
Page "Sending a Page" on page 108
Redial "Accessing the Redial List" on page 67
Directory "Using the Directory" on page 74
Call Log "Using the Call Log" on page 102
Messages "Voicemail Overview" on page 83
Intercom "Making an Intercom Call (Line
Appearance Mode)" on page 36
24
14. In Call Appearance mode, key 1 is