Configure Hardware With Pre-Defined Configuration File - ICP DAS USA I-8092F User Manual

2.19 Configure hardware with pre-defined configuration
file
short i8092MF_ LOAD_CONFIG
Description:
This function loads the pre-defined configuration file and set the target I8092
module automatically. The configuration file is generated by the PACEzGo.
Parameters:
cardNo:
Return:
0: successfully
-1: cannot open the pre-defined configuration file.
Example:
i8092MF_ LOAD_CONFIG
//load the configuration file and configure the module 1.
ICPDAS
(BYTE
Module number
(1);
cardNo)
28
I-8092F Software User Manual