Set Digital Gain; Set Sensor Mode - HikRobot GigE User Manual

enter Gain (dB) directly.

10.10.2 Set Digital Gain

Apart from analog gain, the device supports digital gain function. When analog gain
reaching its upper limit and the image is still too dark, it is recommended to improve
image brightness via digital gain.
Click Analog Control, enable Digital Shift Enable, and enter Digital Shift according to
actual demands.
Note
When increasing the digital gain, the image noise will greatly increase too, which will
severely influence image quality. It is recommended to use analog gain first, and then to
adjust digital gain if the analog gain cannot meet demands.

10.11 Set Sensor Mode

Note
The sensor mode function may differ by device models.
The device provides two types of sensor mode, including high full well capacity and high
sensitivity.
● High Full Well Mode: It greatly improves the overall brightness of images and is
applicable to low-light environment.
● High Sensitivity: It improves the image's sensitivity.
GigE Line Scan Camera User Manual
Figure 10-26 Set Digital Gain
67