HikRobot GigE User Manual page 5

device, follow the signs on the device and in the manual, and all safety instructions
described in the manual.
● The note, warning and danger items in the manual do not represent all the safety
instructions that should be observed, but only serve as a supplement to all the safety
instructions.
● The device should be used in an environment that meets the design specifications,
otherwise it may cause malfunctions, and malfunctions or component damage caused
by non-compliance with relevant regulations are not within the scope of the device's
quality assurance.
● Our company will not bear any legal responsibility for personal safety accidents and
property losses caused by abnormal operation of the device.
Caution:
● In the use of the device, you must be in strict compliance with the electrical safety
regulations of the nation and region.
● Use the power adapter provided by the official manufacturer, and the power supply
should meet LPS or PS2 requirements according to IEC 60950-1 or IEC 62368-1
standard. For the specific requirements of the power adapter, please refer to the
device's specifications.
● To reduce the risk of fire or electric shock, do not expose the device to rain or moisture.
● Make sure that the device is firmly fixed when installing it in the use environment.
● If the device does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the device yourself (we shall not assume any
responsibility for problems caused by unauthorized repair or maintenance).
● Avoid installing the device in a vibration or shock environment, and keep it away from
electromagnetic interference sites (ignoring this may damage the device).
● Do not directly touch the heat dissipation parts of the device to avoid burns.
● Do not install the indoor device in an environment where it may be exposed to water or
other liquids.
● Do not use the device in high temperature, low temperature or high humidity
environment. For specific temperature and humidity requirements, please refer to the
device's specifications.
● Avoid aiming the lens at strong light (such as lighting, sunlight, or laser beams, etc.),
otherwise the image sensor will be damaged.
● Do not touch the image sensor directly. If cleaning is necessary, please slightly dampen
a soft clean cloth with alcohol and gently wipe off the dust. When the device is not in
use, please attach a dust cover to protect the image sensor.
Personnel Requirement
Quality requirements for installation and maintenance personnel: Qualification certificate
or working experience in weak current system installation and maintenance, and relevant
working experience and qualifications. Besides, the personnel must possess the following
knowledge and operation skills:
● The basic knowledge and operation skills of low voltage wiring and low voltage
GigE Line Scan Camera User Manual
iv