File Access Control - HikRobot GigE User Manual

command across the network.
● When the benchmark device receives the command, all devices will trigger certain
actions simultaneously after the specified delay time.
11. (Optional) Enable Periodically Send to enable the client to send commands periodically,
and enter Sending Interval according to actual demands.
Note
The default value of sending interval is 1000 ms, and its range is from 1 ms to 3600000
ms.
12. (Optional) Enable Request Acknowledgement to display the acknowledgement
messages.
13. Click Start Sending.

11.6 File Access Control

Note
The file access control function may differ by device model.
The file access function can import or export the device's feature files and save them in
mfa format. The supported feature files include User Set 1/2/3, LUT Luminance 1/2/3,
USER PRNUC 1/2/3, and USER FPNC 1/2/3.
Steps
1. Select a device in the device list, and click
2. Select Device Feature and click Import or Export.
GigE Line Scan Camera User Manual
Figure 11-14 File Access
to open the file access dialogue box.
95