Index List For The Input Channel - Christie Boxer 4K Series User Manual

Channel Name
12 Lens Vertical Position
(Fine)
13 Input
14 Fade Time
15 to 24 Reserved

Index list for the input channel

the following table provides the index information for the input channel.
Not all options listed in the table are available on all products. Available options depend on the projector
model and the cards installed on the projector. The QSFP+ options require the Enable Christie Link
option to be set.
Input Description
index
1 One-port [0-1]
2 One-port [0-2]
3 One-port [0-3]
4 One-port [0-4]
5 One-Port [1-1]
6 One-Port [1-2]
7 One-Port [1-3]
8 One-Port [1-4]
9 One-Port [2-1]
10 One-Port [2-2]
11 One-Port [2-3]
12 One-Port [2-4]
13 One-Port [3-1]
14 One-Port [3-2]
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
255 = Full upper position
(100%)
1 to 80 = Input index
86 = Load
91 to 170 = Additional
input indices
171 = Execute
0 = 0 seconds
250 = 2.5 seconds
Reserved for future use.
Input Description
index
44 Four-Port [1-2][2-2][3-2][4-2]
45 One-Port, Dual-Input 3D L:[0-1],R:[0-2]
46 One-Port, Dual-Input 3D L:[0-3],R:[0-4]
47 One-Port, Dual-Input 3D L:[1-1],R:[1-2]
48 One-Port, Dual-Input 3D L:[1-3],R:[1-4]
49 One-Port, Dual-Input 3D L:[2-1],R:[2-2]
50 One-Port, Dual-Input 3D L:[2-3],R:[2-4]
51 One-Port, Dual-Input 3D L:[3-1],R:[3-2]
52 One-Port, Dual-Input 3D L:[3-3],R:[3-4]
53 One-Port, Dual-Input 3D L:[4-1],R:[4-2]
54 One-Port, Dual-Input 3D L:[4-3],R:[4-4]
55 One-Port, Dual-Input 3D L:[1-1],R:[2-1]
56 One-Port, Dual-Input 3D L:[1-2],R:[2-2]
57 One-Port, Dual-Input 3D L:[1-3],R:[2-3]
Configuring communications
Suggested Notes
starting
position
• A 250 ms delay exists
before sending this
channel to the projector.
0 To change inputs, send the
following sequence:
Load > Input index > Execute
Channel 1 slider lock can be
used if a keypad is not
available for the input
selection.
— Determines the length of time
it takes for the shutter to open
and close with a fading effect.
— —
44