Issuing the (LCB+ZOOM 1) serial command also manually calibrates the lens.
2. To start the calibration, select Calibrate Zoom Lens.
3. At the confirmation prompt, select Calibrate Zoom Lens.
The Zoom menu item is greyed out until the calibration is complete, which can take up to a
minute.
Determining what lens warnings are displayed
Controls the level of lens warnings displayed.
1. Select MENU > Configuration > Lens Settings > Lens Warnings.
2. Select the appropriate lens warning level:
•
Show All Warnings—Shows all lens warnings.
•
Hide Zoom Motor Warnings—Hides zoom motor warnings. Christie recommends
selecting this option when using a fixed lens as all zoom operations are disabled.
•
Hide Detection Warnings—Hides lens detection warnings. Christie recommends
selecting this option when using a third-party lens.
3. Select Enter.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image
24