Editing A Macro; Deleting A Macro; Configuring The Gpio - Christie Boxer 4K Series User Manual

Editing a macro

Edit the macro if the functionality of the macro has changed.
This feature is only available on the web interface.
1. From the home page of the web interface, select Macros and GPIO.
2. From the list of macros, select Edit next to the macro you want to edit.
3. Modify the appropriate fields.
4. To save the macro, select Save.

Deleting a macro

Delete one or more macros if they are no longer relevant.
This feature is only available on the web interface.
1. From the home page of the web interface, select Macros and GPIO.
2. From the list of macros, select one or more macros to delete.
To delete all the macros in the list, select Select All.
The number of macros you want to delete is displayed next to the trash can.
3. Select Delete.
4. At the confirmation prompt, select Delete.

Configuring the GPIO

The Generic Purpose Input Output (GPIO) provides a flexible method of interfacing with external
devices to the projector.
The GPIO is configured to automate real time events. Each of the seven pins is defined as either an
input or output depending on the required outcome. The remaining two pins are reserved for ground
and power.
Configure the pin as an input if you want the projector to respond to something the device does and
as an output if you want the external device to respond to an action taken by the projector. For
example, configure the pin as an output if you want the lighting in a room to automatically dim when
the projector is turned on.
This feature is only available on the web interface.
1. From the home page of the web interface, select Macros and GPIO.
2. Select GPIO Configuration.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring communications
48