Ultra short throw lens control limitations
The projector has keep-out areas for the ultra short throw lens position, illustrated below. When
adjusting the lens offset, these regions are unavailable to prevent interference and potentially damage
of internal components.
Enabling the ultra short throw lens keep-out area
Not switching to the ultra short throw lens keep-out area risks damaging the projector when an ultra
short throw lens is installed.
1. Select MENU > Configuration > Lens Settings.
2. Select Enable UST Lens 0.38:1.
3. To enable the ultra short throw lens keep-out area, select Enter.
The reduced keep-out area is implemented and the lens offset is set to zero.
4. To use a non-ultra short throw lens, clear the checkbox to disable this option.
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image
26