Table of Contents
Advertisement
Installation Manual, Chapter 9 – Telephone Programming
November 2003, A6-506000-642-01(8508), Release 6.0
Function
Function Name and
Number
Telephone Display
034
Voice Mail/SLT
Selection
P034 VMI CONNECT
035
Voice Mail DTMF Delay
Timer Selection
P035 VMI DELAY
036
Voice Mail DTMF
Duration /Interdigit Time
Selection
P036 VMI DTMF
037
Voice Mail Digit Prefix
Assignment
P037 VMI PREFIX
038
Voice Mail Message
Set/ Cancel Code
Assignment
P038 VMI CODES
039
Voicemail Pilot Number
P039 VM PILOT
Description
Specify whether or not the
SLI(2)-B13 ETU ports are
connected to an external
voice mail system. When
–
set to Yes, both ports
provide analogue voice
mail integration signalling.
Specify the delay after off-
hook before DTMF tones
are sent to the external
voice mail ports.
1
Specify the DTMF signal
duration and interdigit time
for digits sent to the
external voice mail ports.
0
Assign the digits which will
prefix the extension
number when a call is
answered by the external
voice mail system.
Specify the access codes
used to set and cancel
message waiting
indication.
01:641
Enter the extension
number of the voice mail
pilot. This may refer to the
–
internal voice mail card or
an external system
connected via voice mail
integration.
Programming Values
– = No
1 = Yes
0 = 0 sec.
5 = 5.0 sec.
1 = 1.0 sec.
6 = 6.0 sec.
2 = 2.0 sec.
7 = 8.0 sec.
3 = 3.0 sec.
8 = 10.0 sec.
4 = 4.0 sec.
9 = 15.0 sec.
0 = 100/70 msec.
1 = 400/100 msec.
Up to 4 digits (0~9, *, #)
Default = Not Assigned
Default:
1: MW Set = 641
2: MW Cancel = 642
Digits 0 ~ 9
Default = Not Specified
177
Advertisement
Table of Contents
