Table of Contents
Advertisement
4.
5.
6.
Switch Settings
There are two switch settings on the APR-UA Unit.
152
Plug the cord of the ACA-UA Unit (AC adapter) into the jack on the APR-UA Unit.
Lead the telephone cord out through the groove in the base as shown in Figure 6-
47: Leading the Telephone Cord out from the Unit.
Figure 6-47: Leading the Telephone Cord out from the Unit
Close the base plate, lead the AC adapter cord out through the hole, and snap the
cover in place.
Figure 6-48: Closing the Base Plate Cover
Plug in the power cord on the AC adapter and the telephone cord in the jack.
Figure 6-49: APR-UA Unit Switches
Installation Manual, Chapter 6 – Installing DTU-Type Multiline Terminals
A6-506000-642-01(8508), Release 6.0, November 2003
Advertisement
Table of Contents
