Wiring To The Ksu; Multiline Telephone Connection (Dterm Series I); Figure 2-40: Etw/Dtu-Type Multiline Terminal And Slt Adapter Connection; Figure 2-41: Dterm Series I Multiline Terminal Connection - NEC Xen alpha Installation Manual

Wiring to the KSU

Multiline Telephone Connection (ETW/DTU-Type)
When connecting ETW or DTU-type Multiline Terminals to the MDF, individually twisted
1-pair cabling must be used. (Refer to Figure 2-40: ETW/DTU-Type Multiline Terminal
and SLT Adapter Connection, Pg 79.)
NOTE:

Multiline Telephone Connection (Dterm Series i)

When Connecting Dterm Series i Multiline Terminals to the MDF, individually twisted 1-
pair cabling must be used. (Refer to Figure 2-41: Dterm Series i Multiline Terminal
Connection, Pg 79.)
NOTE:
Installation Manual, Chapter 2 – KSU Installation
November 2003, A6-506000-642-01(8508), Release 6.0
Polarity is not critical as the Multiline Terminals are not polarity conscious.

Figure 2-40: ETW/DTU-Type Multiline Terminal and SLT Adapter Connection

Polarity is not critical as the Multiline Terminals are not polarity conscious.

Figure 2-41: Dterm Series i Multiline Terminal Connection

79