Table of Contents
Advertisement
4.
5.
86
Insert one end of the telephone line cord into the RJ-11 jack. Route the cord inside
the height adjustment stand as indicated in the diagram. The cord can be
wrapped more than once inside the height adjustment stand to shorten the length
of cord. The cord can exit either the top of the telephone or the side, depending on
the most convenient location of the RJ-11 wall jack.
Using a philips head screwdriver, insert the flat head wood screw (provided) into
the stopper and fasten to the wall.
Installation Manual, Chapter 3 – Installing DTB-Type Multiline Terminals
Line
Cord
A6-506000-642-01(8508), Release 6.0, November 2003
Advertisement
Table of Contents
