Installing Line Cards & Plastic Panels; Line Card And Plastic Panel Installation; Figure 6-8: Installing Line Card And Plastic Panel On A Multiline Terminal; Figure 6-9: Installing Plastic Panel - NEC Xen alpha Installation Manual

S 5
E C T I O N

Line Card and Plastic Panel Installation

I L
NSTALLING INE
Line Cards can be used to print the line key designations. These are then placed on
C &
ARDS
the Multiline Terminal providing a quick reference of key designations to the Multiline
P
LASTIC
Terminal users. The Line Cards can be changed as necessary. The Plastic Panel is
P
ANELS
placed on top of the Line Card to hold it in place.
1.
2.
Installation Manual, Chapter 6 – Installing DTU-Type Multiline Terminals
November 2003, A6-506000-642-01(8508), Release 6.0
Place the Line Card over the keys on the Multiline Terminal.
Place the tabs on the bottom of the plastic panel into the grooves at the terminal
bottom, and press top right and left ends to secure plastic panel to the
Multiline Terminal. Refer Figure 6-8: Installing Line Card and Plastic Panel on a
Multiline Terminal.

Figure 6-8: Installing Line Card and Plastic Panel on a Multiline Terminal

Figure 6-9: Installing Plastic Panel

131