Table of Contents
Advertisement
Trunk Programming
Programming
184
To change the default setting for a trunk port, dial the 1 digit number that
corresponds to the trunk you want to change (1 to 6, as appropriate). For
Note:
example, to change the setting for trunk Port 1, dial "1". Depending on the
function number, dialling the port number will either toggle its setting between
two values or, where more than two values are available, will cause that setting
to flash. When the setting flashes, you are required to enter a third digit, this
being the new programming value (0 to 9, as appropriate). Port numbers are
shown in descending order, with Port 01 on the right-hand side of the display.
Table 9-2: Trunk Programming Functions
Function
Function Name and
Number
Telephone Display
101
Telephone Number
Display for Trunk Line 1
P101 LN1 TEL NO
102
Telephone Number
Display for Trunk Line 2
P102 LN2 TEL NO
103
Telephone Number
Display for Trunk Line 3
P103 LN3 TEL NO
104
Telephone Number
Display for Trunk Line 4
P104 LN4 TEL NO
105
Telephone Number
Display for Trunk Line 5
P105 LN5 TEL NO
106
Telephone Number
Display for Trunk Line 6
P106 LN6 TEL NO
107
Trunk Line Type
P107 TRUNK TYPE
108
Trunk Line Function
P108 TRUNK STS
109
Trunk Line Dialling Type
P109 CO LN SLCT
Description
Used to assign the trunk
line telephone number that
is displayed when making
and answering trunk line
calls.
Used to indicate the trunk
line type; from a Central
Office or from a PBX.
654321
Used to indicate which trunk
is to be set for incoming
calls only.
654321
Used to indicate the type of
dialling; Dial Pulse (10 pps/
20 pps), Dual Tone
111111
Multifrequency, ISDN, or
uninstalled.
DP = Rotary Dial
DTMF = Touchtone
ISDN = Integrated Services
Digital Network
Installation Manual, Chapter 9 – Telephone Programming
Programming Values
Not Assigned
Maximum of 13 digits.
1 =Central Office Line
– = PBX Line
1 = Allows Outgoing/
Incoming Calls
– = Incoming calls only
0 = Uninstalled
1 = Dual Tone
Multifrequency
(DTMF) or ISDN
2 = Dial Pulse (DP) 10 pps
3 = Dial Pulse (DP) 20 pps
A6-506000-642-01(8508), Release 6.0, November 2003
Advertisement
Table of Contents
