Omron CK3M Seres Hardware User Manual page 189

Product name
Cables
RJ45 Assembly Connec-
tors
*1. We recommend that you use combinations of the above cables and connectors.
 Attaching the Connectors to the Cable and Pin Assignments
Use straight wiring to attach the connectors to the communications cable, as shown below.
Pin No.
1
2
3
4
5
6
7
8
Hood
Note 1. Connect the cable shield to the connector hood at both ends of the cable.
Note 2. There are two connection methods for Ethernet: T568A and T568B. The T568A connection method
is shown above, but the T568B connection method can also be used.
The connector specifications are as follows.
Item
Electrical characteristics Conforms to IEEE 802.3 standards.
Connector structure
The pin assignments are as follows.
8
1
Pin No.
1 Transmission data +
2 Transmission data −
3 Reception data +
4
5
6 Reception data −
7
CK3M/CK5M Series Programmable Multi-Axis Controller Hardware User's Manual (O036)
Manufacturer
Kuramo Electric Co., Ltd.
JMACS Japan Co., Ltd.
OMRON Corporation
Wire color
White-Green
Green
White-Orange
Blue
White-Blue
Orange
White-Brown
Brown
Shield
RJ45 8-pin modular connector (Conforms to ISO 8877)
Signal name Abbreviation Signal direction
TD+
TD−
RD+
Not used. ---
Not used. ---
RD−
Not used. ---
Model
*1
KETH-PSB-OMR
*1
PNET/B
*1
XS6G-T421-1
Wire color
White-Green
Green
White-Orange
Blue
White-Blue
Orange
White-Brown
Brown
Shield
Specification
Output
Output
Input
---
---
Input
---
5 Wiring
Contact information
Kuramo Electric Co., Ltd.
JMACS Japan Co., Ltd.
OMRON Customer Serv-
ice Center
Pin No.
1
2
3
4
5
6
7
8
Hood
5-11
5