Omron CK3M Seres Hardware User Manual page 158

4 Installation
(2)
3
Lock all the DIN Track mounting hooks.
4
Install a DIN Track End Plate on each end of the Controller.
To mount an End Plate, hook from the underside (1), hook to the upper side, and then pull
downward (2).
Then tighten the screw to lock the End Plate in place.
Precautions for Safe Use
Always turn OFF the power supply to the Controller before attempting any of the following.
• Mounting or removing the Units.
• Assembling the Units.
• Setting rotary switches.
• Connecting cables or wiring the system.
• Connecting or disconnecting the terminal blocks or connectors.
4-12
DIN Track
DIN Track mounting hook
End plate
CK3M/CK5M Series Programmable Multi-Axis Controller Hardware User's Manual (O036)
(1)
(2)
(1)