Omron CK3M Seres Hardware User Manual page 154

4 Installation
Mounting with the DIN Track on the Bottom
DIN Track
Mounting with the Rack Upside Down
Additional Information
A Controller must be mounted on a DIN Track. It cannot be mounted with screws.
 Wiring Ducts
Whenever possible, route I/O wiring through wiring ducts.
Install mounting bracket so that it is easy to fish wire through the duct. It is handy to have the duct
at the same height as the CPU Rack.
Duct
Unit
Duct
4-8
20 mm min.
DIN Track
20 mm min.
CK3M/CK5M Series Programmable Multi-Axis Controller Hardware User's Manual (O036)
Mounting with the DIN Track on the Top
DIN Track
Mounting with the DIN Track Installed
Vertically