Siemens Simotics Connect 400 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. I/O Systems
  5. SIMOTICS CONNECT 400
  6. Operating instructions manual

Siemens Simotics Connect 400 Operating Instructions Manual

Hide thumbs Also See for Simotics Connect 400:
Table of Contents

Advertisement

Quick Links

Download this manual
www.siemens.com/digital-motor

Advertisement

Table of Contents
loading

Related Manuals for Siemens Simotics Connect 400

Summary of Contents for Siemens Simotics Connect 400

  • Page 1 www.siemens.com/digital-motor...
  • Page 3 Safety instructions Description Preparations for use SIMOTICS CONNECT 400 Mounting and installation Commissioning Operating Instructions Operation Maintenance Disposal Further information SIMOTICS CONNECT 400 V0.6.0.0 SIDRIVE IQ Config (Android) V1.4.0 SIDRIVE IQ Config (iOS) V1.0.0 SIDRIVE IQ Fleet V2.3 08/2021 A5E50161952B AE...
  • Page 4 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 5: Table Of Contents

    General safety instructions....................9 Qualified personnel......................9 Security information ......................10 Description............................11 SIDRIVE IQ Fleet ......................... 11 "SIMOTICS CONNECT 400" connectivity module ..............12 Preparations for use..........................15 Visual inspection........................ 15 Shipping and storage conditions ..................15 Requirements ........................16 Mounting and installation ........................
  • Page 6 Replacing the connectivity module................... 103 Replace the battery ......................104 Changing the attachment position of the mounting bracket ..........106 Disposal ............................. 107 Disposing of the connectivity module................107 Disposing of the battery....................107 SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 7 Table of contents Further information ........................... 109 10.1 Product information......................109 10.2 Product support ....................... 109 10.3 Technical data........................111 10.4 Directives and standards ....................113 Index ..............................117 SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 8 Table of contents SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 9: Introduction

    Text references References to other texts always refer to the beginning of the chapter. Naming convention In this documentation, the generic term "Connectivity module" is used for the "SIMOTICS CONNECT 400" product. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 10 Introduction 1.2 Naming convention SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 11: Safety Instructions

    • Through appropriate training and experience, they are able to recognize and avoid risks and potential dangers in their particular field of activity. • Those responsible have instructed them to carry out the work. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 12: Security Information

    (https://www.siemens.com/industrialsecurity). Special security notes for SC400 • Make sure that the Bluetooth range of SIMOTICS CONNECT 400 does not extend outside of the company site (approx. 5-10 meters). • Make sure that the WLAN is used with awareness of security issues. This includes using the WPA2 security protocol.

  • Page 13: Description

    SIDRIVE IQ Fleet SIMOTICS CONNECT 400 connects drive train components with the cloud-based analytics of the SIDRIVE IQ Fleet MindSphere application. This enables you to improve the productivity, reliability, and service options of the drive train component.

  • Page 14: Simotics Connect 400" Connectivity Module

    The captured motor data are transmitted to SIDRIVE IQ Fleet via a WLAN interface and analyzed. Note The SIMOTICS CONNECT 400 connectivity module can be used in combination with rib-cooled low-voltage induction motors (see Technical specifications (Page 111)). Components The connectivity module encompasses the following components: •...
  • Page 15 Description 3.2 "SIMOTICS CONNECT 400" connectivity module Data security The data are backed up using the following mechanisms: • Data are stored in the connectivity module until they are transferred to the cloud • Encrypted transmission via a WLAN interface according to the WPA2 standard •...
  • Page 16 Description 3.2 "SIMOTICS CONNECT 400" connectivity module SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 17: Preparations For Use

    Do not damage the connectivity module while the motor is being transported, stored and operated. It is not permissible that the connectivity module is subject to mechanical loads and stress. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 18: Requirements

    The SIMOTICS CONNECT 400 connectivity module does not support WLAN authentication protocols according to IEEE 802.1X. Ports that are used Release the following ports used by SIMOTICS CONNECT 400 to allow an Internet connection to be established: • Secure data exchange with SIDRIVE IQ Fleet: TCP port 443 •...

  • Page 19: Mounting And Installation

    Mounting and installation NOTICE SIMOTICS CONNECT 400 housing with an IP54 degree of protection If the ambient conditions according to IP54 cannot be ensured at the installation location – or if a higher degree of protection is required – then the user must apply additional measures to ensure safe and reliable operation.
  • Page 20 In the horizontal plane, the center of the connectivity module should be ⅓ of the way along the housing length from the drive end. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 21 2. Choose the position for the connectivity module on the motor. The following figures show examples of the position for the connectivity module on the motor. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 22: Mounting The Connectivity Module

    Mounting the connectivity module For easier handling while mounting on the motor, we recommend first screwing the connectivity module to the mounting bracket. The battery is not contacted in the delivered condition. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 23 The following figures provide an overview of the relevant mounting elements of the connectivity module in the closed and open condition: ① Front cover ② Cover fastening screws ③ Fastening screws ④ Battery ⑤ Battery plug ⑥ Plug-in socket SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 24 The LED display of the connectivity module may light up for longer than 40 seconds for the battery test. 7. Put the front cover back in position. Ensure that the cover fits precisely. 8. Tighten the 2 central fastening screws at the front cover by hand. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 25: Commissioning

    1. Open the Google Play Store. (https://play.google.com/store/apps/details? id=com.siemens.configapp) 2. Install the Siemens "SIDRIVE IQ Config" application. After the first start of the application, the terms of use are displayed once. Take note of them and click "Accept" to confirm. The "SIDRIVE IQ Config" application requires the following access authorizations: –...

  • Page 26: Establishing The Connection To The Connectivity Module

    10 m. The BLE name (=Bluetooth name of the device) set in the factory is "SC400". You can change the name at a later point in time. Use the "Identify" function to check that you are connected with the required connectivity module (Page 83). SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 27 Status of the connectivity module battery: • "Green" status: sufficient charge • "Red" status: low charge, 30% or less Note: Replace the battery in good time. If disturbances occur in data transmission, replace the batteries (Page 104). SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 28: Log In With The Connectivity Module

    Change the user name and the password after the first logon. In the "Device Credentials" step of the commissioning wizard, you are requested to change the login data. You can also change the login data in the menu "Settings > User" of the "SIDRIVE IQ Config" application. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 29: Guided Commissioning

    Note Commissioning wizard - Help For each commissioning step, you can call help with the icon. Requirement You are logged on to the connectivity module via the "SIDRIVE IQ Config" application. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 30: Device Credentials - Step 1/7

    1. Select the "SIMOTICS CONNECT" menu. 2. Start the commissioning wizard with the "COMMISSION" button. 6.2.4.2 Device Credentials - Step 1/7 Change the login data for protection against unauthorized access to the connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 31 – At least one uppercase letter (A-Z) – At least one lowercase letter (a-z) – At least one numeral (0-9) – The following special characters are permitted: Hyphens (-) and underscores (_) are allowed. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 32: Wlan - Step 2/7

    Connect the connectivity module to the WLAN network. Supported WLAN networks The current version of the SIMOTICS CONNECT 400 connectivity module does not support proxy server configuration. The connectivity module encrypts your data according to security standard WPA2. For data transfer, the connectivity module supports WLAN connections with a frequency of 2.4 GHz and...

  • Page 33: Firmware - Step 3/7

    6.2.4.4 Firmware - Step 3/7 To keep the firmware of the connectivity module up to date and to implement new functions, firmware updates are regularly made available. The firmware is provided by Siemens as a file in "*.bin" format. Note...
  • Page 34 • On your mobile device, allow access the "SIDRIVE IQ Config" application memory. • The connectivity module must be located in the same WLAN network as is presently being used by the mobile device. • Load the latest firmware version onto your mobile device. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 35 If you restart the commissioning wizard within five minutes of disconnecting the Bluetooth connection, commissioning will be resumed at Step 4/7 - Intervals. If the Bluetooth connection is disconnected for longer than 5 minutes, start commissioning at Step 1/7 - Device Credentials. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 36: Intervals - Step 4/7

    This setting is always three times the short measurement interval that has been set. • 24 hours - interval for transmission of the stored data to "SIDRIVE IQ Fleet" You can modify these settings within a preset range of 1 to 48 hours. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 37: Mindsphere Access - Step 5/7

    In the following step, you establish the MindSphere access for onboarding. The process applied from connecting and registering the connectivity module through to the MindSphere application "SIDRIVE IQ Fleet", including all settings, is called onboarding. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 38 1. Enter the MindSphere tenant name in the "Tenant name" field. The length is limited to 8 characters. If you have received a special URL from Siemens for onboarding, enter it in the "Tenant name" field. Start entering the URL with "https://".
  • Page 39 It is possible that the Recognize text / Word suggestions function of your mobile device enters a blank at the end of the email address that is entered. Delete this blank before logging in. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 40: Motor Details - Step 6/7

    If the connectivity module is retrofitted or replaced with a replacement device, the serial number and the product article number of the motor must be reassigned. This operation then updates SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 41 Commissioning 6.2 Commissioning with Android the associated motor information. Only assign the connectivity module to the motor on which it is mounted. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 42 Scan the "Data Matrix Code" of the motor by tapping the "SCAN DATA MATRIX" button. Note Motor assignment by scanning the data matrix code is only possible if the Siemens motor has been provided with a 2D code. 2. With the "NEXT" button, you synchronize with the cloud. If the motor data set is present in the digital twin database, you go on to Step 7/7 - Asset Info.
  • Page 43 This applies both to Siemens motors and to motors of other manufacturers. Proceed as described below to create a new motor data set.
  • Page 44 Mindsphere application "SIDRIVE IQ Fleet". Note Mandatory fields The input fields marked "*" are mandatory fields. Note Text color in input fields black = predefined values can be overwritten gray = expected input format SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 45 Commissioning 6.2 Commissioning with Android SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 46 For this, besides current, you can also enter values for speed, efficiency, and power factor. Gaps in the data are permitted, however: The more data you enter, the more accurately you will be able to determine the operating point. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 47 Commissioning 6.2 Commissioning with Android Note Shaft height If the shaft height is not stated on the rating plate, you must measure the shaft height. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 48: Asset Info - Step 7/7

    Asset Info - Step 7/7 Note Settings cannot be modified subsequently Select the following settings carefully. There is no way of modifying the settings after selection. If you choose an incorrect setting, repeat the onboarding process. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 49 Choose an asset name to which the asset can be uniquely assigned in "SIDRIVE IQ Fleet". You must not reuse an existing asset name. – Asset description – Location 2. Select the application type. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 50 – Converter operation - variable speed drive operation (VSD) Note With the current firmware version 0.6.0, for motors in converter operation (VSD) in "SIDRIVE IQ Fleet", no values are displayed for torque, electrical power consumption, and energy consumption. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 51 Commissioning 6.2 Commissioning with Android 5. Complete the step with the "NEXT" button. 6. Finish commissioning with the "COMMISSION" button. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 52 • Value "0": Motor off (OFF), sensor calibrated • Value "1": Motor status not defined, sensor not calibrated • Value "3": Motor on (RUN), sensor calibrated No additional measures are required to support calibration. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 53: 6.3 Commissioning With Ios

    Installing the "SIDRIVE IQ Config" application 1. Open the App Store (https://apps.apple.com/de/app/sidrive-iq-config/id1578297088). 2. Install the Siemens "SIDRIVE IQ Config" application. After the first start of the application, the terms of use are displayed once. Take note of them and click "Accept" to confirm.
  • Page 54 Button for establishing a connection to the connectivity module If necessary, confirm a pairing request to establish the Bluetooth connection. Procedure 1. Open the "SIDRIVE IQ Config" application. 2. Select an asset from the list. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 55 "SIDRIVE IQ Config". For Bluetooth pairing with PIN input, follow the instructions in the following section. Note If an older firmware version is installed on your connectivity module, we recommend performing a firmware update. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 56 2. To scan, hold the camera of your mobile device over the 2D code on the left at the top of the connectivity module. 3. If scanning was successful, "SIDRIVE IQ Config" displays the Bluetooth pairing PIN and copies it to the clipboard. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 57: Log In With The Connectivity Module

    Change the user name and password after logging on for the first time for protection against unauthorized access to the connectivity module. In the "Device Credentials" step of the commissioning wizard, you are requested to change the login data. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 58: Guided Commissioning

    Note Commissioning wizard - Help For each commissioning step, you can call help with the icon. Requirement You are logged on to the connectivity module via the "SIDRIVE IQ Config" application. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 59: Device Credentials - Step 1/7

    6.3 Commissioning with iOS Procedure 1. Start the commissioning wizard with the "Commission" button. 6.3.4.2 Device Credentials - Step 1/7 Change the login data for protection against unauthorized access to the connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 60 – The following special characters are permitted: Hyphens (-) and underscores (_) are allowed. 4. Enter the new password again in the "Repeat password" field. 5. Move on to the next step with the "Next" button. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 61: Wlan - Step 2/7

    Connect the connectivity module to the WLAN network. Supported WLAN networks The current version of the SIMOTICS CONNECT 400 connectivity module does not support proxy server configuration. The connectivity module encrypts your data according to security standard WPA2. For data transfer, the connectivity module supports WLAN connections with a frequency of 2.4 GHz and...

  • Page 62: Firmware - Step 3/7

    6.3.4.4 Firmware - Step 3/7 To keep the firmware of the connectivity module up to date and to implement new functions, firmware updates are regularly made available. The firmware is provided by Siemens as a file in ".bin" format. Note...
  • Page 63 • On your mobile device, allow access the "SIDRIVE IQ Config" application memory. • The connectivity module must be located in the same WLAN network as is presently being used by the mobile device. • Load the latest firmware version onto your mobile device. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 64 If you restart the commissioning wizard within five minutes of disconnecting the Bluetooth connection, commissioning will be resumed at Step 4/7 - Intervals. If the Bluetooth connection is disconnected for longer than 5 minutes, start commissioning at Step 1/7 - Device Credentials. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 65: Intervals - Step 4/7

    This setting is always three times the short measurement interval that has been set. • 24 hours - interval for transmission of the stored data to "SIDRIVE IQ Fleet" You can modify these settings within a preset range of 1 to 48 hours. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 66: Mindsphere Access - Step 5/7

    In the following step, you establish the MindSphere access for onboarding. The process applied from connecting and registering the connectivity module through to the MindSphere application "SIDRIVE IQ Fleet", including all settings, is called onboarding. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 67 1. Enter the MindSphere tenant name in the "Tenant name" field. The length is limited to 8 characters. If you have received a special URL from Siemens for onboarding, enter it in the "Tenant name" field. Start entering the URL with "https://".

  • Page 68: Motor Details - Step 6/7

    This operation then updates the associated motor information. Only assign the connectivity module to the motor on which it is mounted. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 69 Scan the "Data Matrix Code" of the motor by tapping the "Scan Data Matrix" button. Note Motor assignment by scanning the data matrix code is only possible if the Siemens motor has been provided with a 2D code. 2. With the "Next" button, you synchronize with the cloud. If the motor data set is present in the digital twin database, you go on to Step 7/7 - Asset Info.
  • Page 70 This applies both to Siemens motors and to motors of other manufacturers. Proceed as described below to create a new motor data set.
  • Page 71 Mindsphere application "SIDRIVE IQ Fleet". Note Mandatory fields The input fields marked "*" are mandatory fields. Note Text color in input fields black = predefined values can be overwritten gray = expected input format SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 72 Commissioning 6.3 Commissioning with iOS SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 73 For this, besides current, you can also enter values for speed, efficiency, and power factor. Gaps in the data are permitted, however: The more data you enter, the more accurately you will be able to determine the operating point. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 74 Commissioning 6.3 Commissioning with iOS Note Shaft height If the shaft height is not stated on the rating plate, you must measure the shaft height. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 75: Asset Info - Step 7/7

    Asset Info - Step 7/7 Note Settings cannot be modified subsequently Select the following settings carefully. There is no way of modifying the settings after selection. If you choose an incorrect setting, repeat the onboarding process. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 76 Choose an asset name to which the asset can be uniquely assigned in SIDRIVE IQ Fleet. You must not reuse an existing asset name. – Asset description – Location 2. Select the application type. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 77 – Converter operation - variable speed drive operation (VSD) Note With the current firmware version 0.6.0, for motors in converter operation (VSD) in SIDRIVE IQ Fleet, no values are displayed for torque, electrical power consumption, and energy consumption. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 78 Commissioning 6.3 Commissioning with iOS 5. Complete the step with the "Finish" button. 6. Finish commissioning with the "Commission" button. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 79 • Value "0": Motor off (OFF), sensor calibrated • Value "1": Motor status not defined, sensor not calibrated • Value "3": Motor on (RUN), sensor calibrated No additional measures are required to support calibration. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 80 Commissioning 6.3 Commissioning with iOS SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 81: Operation

    • You have logged onto the connectivity module (Page 26). • The WLAN connection has been set up. • The SIMOTICS Connect 400 connectivity module is registered with IQFleet. • You have the role "iqfleet.offboarding" in "SIDRIVE IQ Fleet". If you do not have this role, offboarding is canceled with an error message "Insufficient rights".
  • Page 82 Operation 7.1 Operation with Android Procedure 1. Select menu "SIMOTICS CONNECT" with the most important basic functions. 2. In the "Delete asset (Offboarding)" entry, tap on the "Execute" button. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 83: Logging In To Mindsphere

    It is possible that the Recognize text / Word suggestions function of your mobile device enters a blank at the end of the email address that is entered. Delete this blank before logging in. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 84 While you are logged in to the "SIDRIVE IQ Config" application, the SIDRIVE IQ Fleet login data for logging in to MindSphere are stored for further processes. If you close the application, then you are automatically logged out of MindSphere. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 85: Executing The Offboarding Process

    Each connectivity module has a blue LED display in the front cover. The LED display is used to visually identify the connectivity module that is currently connected to "SIDRIVE IQ Config" more easily. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 86: Changing Measurement And Synchronization Intervals

    • 24 hours - interval for transmission of the stored data to SIDRIVE IQ Fleet You can change these settings within a specified range of between 1 and 48 hours. Note Effects that influence the battery life Shorter intervals result in a shorter battery life. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 87 1. Select the "Settings" menu. 2. Select the "Sensor values" submenu. 3. Change the measurement interval. 4. Change the synchronization interval. 5. Confirm your changes by tapping on "Send". The "Calculated battery life" is updated. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 88: Changing The User Data Of The Connectivity Module

    5. Enter the new password again in the "Repeat password" field. 6. Confirm your changes by tapping on "Send". The user data are changed. 7.1.5 Check asset data After onboarding, you can display the asset data stored in the connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 89: Operation With Ios

    After offboarding, transmission of measurement data to "SIDRIVE IQ Fleet" is no longer possible. To transfer data, start a new onboarding process. Offboarding is the precondition for a new onboarding process to "SIDRIVE IQ Fleet". SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 90 • The WLAN connection has been set up. (Page 59) • The SIMOTICS Connect 400 connectivity module is registered with IQFleet. (Page 73) • You have the role "iqfleet.offboarding" in "SIDRIVE IQ Fleet". If you do not have this role, offboarding is canceled with an error message "Insufficient rights".
  • Page 91 Operation 7.2 Operation with iOS Procedure 1. Select "Delete asset (Offboarding)" in the dashboard view. 2. Confirm initiation of the offboarding process with "Yes". SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 92: Identifying The Connectivity Module Via The "Sidrive Iq Config" Application

    Each connectivity module has a blue LED display in the front cover. The LED display is used to visually identify the connectivity module that is currently connected to "SIDRIVE IQ Config" more easily. Use the "Identify" function to check that you are connected with the required connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 93: Changing Measurement And Synchronization Intervals

    • 24 hours - interval for transmission of the stored data to SIDRIVE IQ Fleet You can change these settings within a specified range of between 1 and 48 hours. Note Effects that influence the battery life Shorter intervals result in a shorter battery life. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 94 7.2 Operation with iOS Procedure 1. In the dashboard view, select "Intervals". 2. Change the measurement interval. The "Calculated battery life" is updated. 3. Change the synchronization interval. The "Calculated battery life" is updated. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 95: Changing The Device Credentials Of The Connectivity Module

    7.2.4 Changing the device credentials of the connectivity module 1. In the dashboard view, select "Device credentials". 2. Change the user names. The user name must not comprise more than 21 characters. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 96: Check Asset Data

    4. Enter the new password again in the "Repeat password" field. 5. Confirm your changes by pressing "Apply" The user data are changed. 7.2.5 Check asset data After onboarding, you can display the asset data stored in the connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 97 Operation 7.2 Operation with iOS Procedure Select "Asset Info" in the dashboard view. The "Asset Info" dialog opens. The values displayed cannot be changed. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 98 Operation 7.2 Operation with iOS SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 99: Maintenance

    Update the firmware using the "SIDRIVE IQ Config" application. Note You will find the latest firmware version at Siemens Industry Online Support (SIOS) (https:// support.industry.siemens.com/cs/de/en/ps/25522/dl). When you log on to SIOS, you can include the URL in your list of Favorites and be informed about available firmware updates in a newsletter.
  • Page 100 – Load from a file located on your mobile device – Via a server address (URL) The firmware is provided by Siemens as a file in ".bin" format. 7. Tap on the "Start" button. A progress bar is displayed while the firmware file is being transferred.

  • Page 101: Updating Software And Firmware (Ios)

    Updating the connectivity module firmware (iOS) To keep the firmware of the connectivity module up to date and to implement new functions, firmware updates are regularly made available. The firmware is provided by Siemens as a file in "*.bin" format.
  • Page 102 LED display on the front of the connectivity module flashes, initially slowly and then faster. After the firmware update, the LED goes out. After the successful firmware update, the connectivity module restarts. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 103: Basic Functions (Android)

    Starts transfer of the measurement data from the memory of the connectivity module to "SI‐ Sphere DRIVE IQ Fleet". Precondition: The onboarding process has already been performed. Battery replacement Sets the battery status display to 100% after battery replacement (Page 104). SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 104: Basic Functions (Ios)

    All of the saved motor data and onboard information are lost. Basic functions (iOS) You can find the most important basic functions for the connectivity module in the dashboard view of the "SIDRIVE IQ Config" application. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 105: Replacing The Connectivity Module

    Connectivity module as a spare part You can order the connectivity module as a spare part (Page 109). The battery is not connected and it has no motor parameters. You must configure the device from new. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 106: Replace The Battery

    If the battery status display of the connectivity module is red, the charge is 30% or less. Replace the battery in good time. If disturbances occur in data transmission, replace the batteries. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 107 To avoid losing measurement data that has been captured, you can transfer data to MindSphere while the battery has sufficient residual capacity and before it is replaced. To do this, use the "Send data to MindSphere" function in the "SIDRIVE IQ Config" application. SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 108: Changing The Attachment Position Of The Mounting Bracket

    If the mounting position used for mounting in the factory is unsuitable because of the available space, you can mount the connectivity module on the opposite side of the motor (see Chapter Mounting the mounting bracket (Page 17)). SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 109: Disposal

    • Dispose of used lithium batteries individually as special waste. • Dispose of used lithium batteries in compliance with all of the local regulations. • Used lithium batteries can be recycled. Recycle your old batteries! SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 110 Disposal 9.2 Disposing of the battery SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 111: Further Information

    (https://www.youtube.com/watch? v=RShjaqjapxo) Using open-source software (OSS) Open-source software is used in the product SIMOTICS CONNECT 400 either unchanged or modified by us. License conditions and open-source software used that have to be published are stored on the CD-ROM supplied with SIMOTICS CONNECT 400.
  • Page 112 A list of available spare parts is available through the spare parts service "Spares on Web (https:// www.sow.siemens.com/)" by selecting the serial number and the MLFB of the motor. In SIDRIVE IQ Fleet in the "Fleet" application area, you will find the link to "Spares On Web" for each configured asset.

  • Page 113: Technical Data

    SIMOTICS CONNECT 400 with integrated sensors monitors the condition of the motor to provide information about motor operation and to enable optimization of the application and process. SIMOTICS CONNECT 400 can only be used in combination with the "SIDRIVE IQ Fleet" MindSphere application. Monitoring application...
  • Page 114 Relative humidity 5% to 95% (without condensation) Software Mobile app for commissioning and con‐ SIDRIVE IQ Config* (Android version via Google Play Store)* figuration * iOS version available soon Mechanics / material SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

  • Page 115: Directives And Standards

    The product meets the requirements if you observe the installation guidelines and safety instructions provided in these operating instructions. Radio Equipment Directive 2014/53/EU SIMOTICS CONNECT 400 complies with the Radio Equipment Directive 2014/53/EU. You can down‐ load the certificate at the following link: Declaration of Conformity (https://support.industry.siemens.com/cs/ww/en/view/109771797) The EC Declaration of Conformity is held on file available to the competent authorities at the fol‐...
  • Page 116 (2) This device must accept any interference received, including interference that may cause un‐ desired operation. Any changes or modifications made to this equipment that are not expressly approved by SIEMENS could void the FCC authority to operate this device.
  • Page 117 เครื ่ อ งโทรคมนาคมและอุ ป กรณ์ น มี ้ ◌ ี ค วามสอดคล ้องตามมาตรฐานหรื อ ข ้อกํ า หนดทางเทคนิ ค ของ กสทช. Australia and New Zealand (RCM, formerly C-Tick) SIMOTICS CONNECT 400 meets the requirements for RCM, Australia and New Zealand SIMOTICS CONNECT 400 meets the requirements for IMDA, Singapore.
  • Page 118 Further information 10.4 Directives and standards KVALITET SIMOTICS CONNECT 400 meets the requirements for KVALITET, Serbia Certification number: P1620134400 SIMOTICS CONNECT 400 meets the requirements of MOC, Israel Certification number: 51-78539 SIMOTICS CONNECT 400 meets the requirements of ICT, Vietman...

  • Page 119: Index

    Qualified personnel, 9 Android, 24 iOS, 51 Replacing, 103 Requirements, 16 Identifying the connectivity module Reset to factory settings, (Android), (iOS) Android, 84 Reset user credentials, (Android), (iOS) iOS, 90 Retrofit, 20 SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...
  • Page 120 Storage conditions, 15 Synchronization intervals, 91 Android, 34, 84 iOS, 63 Technical Support, 109 Transport conditions, 15 Updating SIDRIVE IQ Config Android, 97 iOS, 99 Updating the firmware Android, 97 Visual inspection, 15 SIMOTICS CONNECT 400 Operating Instructions, 08/2021, A5E50161952B AE...

Table of Contents