Siemens SIMOTICS CONNECT 400 Operating Instructions Manual page 163

Requirements
• On your mobile device, allow access the "SIDRIVE IQ Config" application memory.
• The connectivity module must be located in the same Wi-Fi network as is presently being
used by the mobile device.
• The Wi-Fi network allows communication between the participants, i.e. between the
connectivity module and the mobile device.
• Load the latest firmware version onto your mobile device.
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
8.5 Replacing the connectivity module
Maintenance
161