Asset Info (Generic Vibration Monitoring) - Step 7/7 - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Commissioning
6.3 Commissioning with iOS
the motor in the "OFF" state. Precise data is displayed in SIDRIVE IQ Fleet as an "operating
mode" signal only after the calibration process:
• Value "0": Motor off (OFF), sensor calibrated
• Value "1": Motor status not defined, sensor not calibrated
• Value "3": Motor on (ON), sensor calibrated
No additional measures are required to support calibration.
Note
During onboarding, the Smart Provisioning mechanism provides the "SIDRIVE IQ Fleet"
application with the resources required for the new asset. Via MindSphere, Smart Provisioning
issues an email regarding the packages available on your tenant.
If it involves the first asset in the tenant, then the resources for "SIDRIVE IQ Fleet Package Basic"
are provided, and you receive an appropriate email.
Every onboarding initiates the provision of resources for "SIDRIVE IQ Fleet Package 1 Asset", and
you receive a corresponding email.
These provisions do not result in any additional costs for your account. All costs are already
included in the SIDRIVE IQ Fleet Asset package that you purchased.
6.3.4.9

Asset Info (Generic Vibration monitoring) - Step 7/7

Enter the asset data in the last step of the commissioning wizard.
104
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL