Siemens SIMOTICS CONNECT 400 Operating Instructions Manual page 197

the motor in the "OFF" state. Precise data is displayed in SIDRIVE IQ Fleet as an "operating
mode" signal only after the calibration process:
• Value "0": Motor off (OFF), sensor calibrated
• Value "1": Motor status not defined, sensor not calibrated
• Value "3": Motor on (ON), sensor calibrated
No additional measures are required to support calibration.
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
Maintenance
8.7 Replacing a motor (iOS)
195