Siemens SIMOTICS CONNECT 400 Operating Instructions Manual page 79

Bluetooth pairing with PIN input- Procedure
Proceed as follows for Bluetooth pairing with PIN input:
1. With the "Scan" button, you find out the required PIN.
If you already have the PIN, you can skip the "Scan" step. Tap on the "PIN input" button. In this
case, you go directly to 4.
2. To scan, hold the camera of your mobile device over the 2D code on the left at the top of the
connectivity module.
3. If scanning was successful, "SIDRIVE IQ Config" displays the Bluetooth pairing PIN and copies
it to the clipboard.
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
Commissioning
6.3 Commissioning with iOS
77