4 Configuration parameters
Parameter
Differential
Configuration
➔Analog inputs
(1) = Low limit
(2) = High limit
(3) = Differential
Text low alarm
Configuration
➔Analog inputs
Text high alarm
Configuration
➔ Analog inputs
Alarm delay
Configuration
➔Analog inputs
4.2.4 Configuration - Event traces
Parameter
Input signal
Configuration
➔ Event traces
54
All manuals and user guides at all-guides.com
➔ Analog input 1—6
➔ Alarm
➔ Differential
➔ Analog input 1—6
➔ Alarm
➔ Text
low alarm
➔ Analog input 1—6
➔ Alarm
➔ Text
high alarm
➔ Analog input 1—6
➔ Alarm
➔ Alarm
delay
➔ Event traces 1 — 4
➔ Input signal
Value/selection
-99999 to 0 to +99999
Standard text,
Text 1 — 18,
No text
Standard text,
Text 1 — 18,
No text
0 — 32767s
Value/selection
Off,
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. al.,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. al.,
Comb. alarm,
Memory al.,
Error,
Modbus-Flag
Description
v Chapter 3.5 "Event list"
v Configuration ➔ Texts,
page 61
Alarm delay is activated at
a value of > 0.
When activated, an alarm
will only be generated
when it has been present
for at least as long as it
takes for the set time to
elapse.
Description
The event (digital signal)
which is to be recorded is
assigned to an event trace.