Table Of Configuration Parameters; Parameter Setting - JUMO LOGOSCREEN 500 Operating Instructions Manual

Paperless recorder
Hide thumbs Also See for LOGOSCREEN 500:
Table of Contents

Advertisement

4 Configuration parameters

4.2 Table of configuration parameters

The table below lists all the instrument parameters. The order in which the pa-
rameters are explained corresponds to the order in which they appear on the
instrument (in the menu structure).
The first column describes the path via the menus and windows to the particu-
lar parameter.
The second column lists the possible settings for the parameter or the possi-
ble selections. The factory default setting in this column is always shown bold.
The third column contains a description of the parameter, or the possible se-
lections, if the parameter and its function or its selection is not self-evident.

4.2.1 Parameter setting

Parameter
Contrast
Parameters
➔ Contrast
Speed indication
Parameters
➔ Speed indication
Switch-off event
Parameters
➔ Display off
Waiting time
Parameters
➔ Display off
Operating signal
Parameters
➔ Display off
Signal type
Parameters
➔ Diagram view
Channel
Parameters
➔ Diagram view
representation
48
All manuals and user guides at all-guides.com
➔ Switch-off event
➔ Waiting time
➔ Operating signal
➔ Signal type
➔ Channel
representation
Value/selection
0 — 16 — 31
in mm/h,
Time/div,
Storage rate
Waiting time,
Operating signal
0 — 32767min
Off,
Logic inp1 — 4
Analog input
Analog&Event
Meas. small,
Scaling,
Bargraph,
Meas. large,
Off
Description
Contrast of display
The selected display mode
is shown in the diagram
representation
The type of display switch-
off is selected here
Time after which the dis-
play is switched off. Any
key stroke will re-activate
the display. The parameter
can only be entered when
the parameter Switch-off
event is set on "Waiting
time". 0 = no switch-off
If one of the 4 logic inputs
(extra code) is set to "off"
and operated, then the dis-
play will be switched off.
The parameter can only be
entered when the parame-
ter Switch-off event is set
on "Operating signal".
Determines which mea-
surements are graphically
displayed
Determines the contents of
the channel line (header)

Advertisement

Table of Contents
loading

Table of Contents