Table of Contents
Advertisement
Disk manager
H
Memory
At the configuration level, a percentage (residual capacity of diskette) can be
specified under Instrument data ➔ Memory alarm. When the residual capacity
alarm
of the inserted diskette reaches this percentage, the signal "Memory alarm" is
activated. It can, for instance, be used to operate a relay or to switch over to
event operation.
v Chapter 2.8 "Data storage"
All manuals and user guides at all-guides.com
Measurement data not yet saved are written to diskette
Counter/intergrator reporting periods are concluded and
written to diskette, together with the measurement data not
yet saved. Counter/integrators are reset (to 0) and restarted.
All measurement data in the memory are written to diskette.
The configuration data are written to diskette
The configuration data are read in from diskette
Select action
The function "Compl. measurement data ➔ Disk." serves to sal-
vage data when the original diskette is no longer available.
Chapter 2.4 "Event traces"
Chapter 4 "Configuration parameters"
3 Operation and visualization
Residual capacity of diskette in percent
Background flashes on error
e. g. "diskette full", "no diskette"
Start action
39
Advertisement
Table of Contents
