Table of Contents
Advertisement
3 Operation and visualization
3.9 Code number (password entry)
The following functions are protected ex-factory from unauthorized access by
a password request:
- the Configuration menu
- parts of the Disk manager menu
- the Parameters ➔ Counter/Int. reset menu
The factory default setting is 9200.
A password can also be used to secure access to the recorder via the serial in-
terface. In this case, however, the factory setting is 0 (no password request). If
you enter a value unequal to 0, please take into account that this number must
also be sent to the recorder by an attached communication program.
H
All passwords can be programmed differently (see Chapter 4.2.2
"Configuration - Instrument data").
Password
request
After the entry has been completed (
the
menu left.
44
All manuals and user guides at all-guides.com
Additional information on password request
for the serial interface can be found in the
Interface Description B 95.5015.2.
Increment (+1) or
decrement (-1) the
selected digit
E
D
key. Using
Select the digit to
be altered
), it can be confirmed by using
, the password request will be stopped and the
Advertisement
Table of Contents
