Table of Contents
Advertisement
The time period for the counter/integrator summation will not be freshly start-
ed. The previous counter/integrator values will also not be saved.
H
In this way, you can restart the recording of individual counters/integrators, for
example, after the test run of an installation; the values of the test run, which
are not required, can thus be eliminated.
You can select a password other than that for accessing the configuration. The
password can be set under Configuration
No.(Password)
Reset via
If the function Update diskette incl. counters is executed in the "Disk manager"
the "Disk
menu, the counts will also be stored and reset.
manager" menu
v See "Disk manager" on page 38.
2.5.3 Behavior on instrument reconfiguration
When the instrument is reconfigured, the current counter/integrator reporting
periods remain unaffected. The counter/integrator values will not be reset to 0
and the reporting period will not be restarted.
H
All manuals and user guides at all-guides.com
If you wish to save the previous counter/integrator values, you have to
execute the function "Update diskette incl. counters" in the Disk manager
menu before resetting.
➔
Counter/Int.reset.
The values can be deliberately reset via the "Parameters" menu.
2 Instrument description
➔
Instrument data
➔
Code
17
Advertisement
Table of Contents
