JUMO LOGOSCREEN 500 Operating Instructions Manual page 52

4 Configuration parameters
Synchronization Configuration
➔ Instrument data
of time
Summer time Configuration
➔ Instrument data
(switch)
Summer time Configuration
➔ Instrument data
(start date)
Summer time Configuration
➔ Instrument data
(start time)
Summer time Configuration
➔ Instrument data
(end date)
Summer time Configuration
➔ Instrument data
(end time)
Language Configuration
➔ Instrument data
Temperature unit Configuration
➔ Instrument data
Memory readout Configuration
➔ Instrument data
50
All manuals and user guides at all-guides.com
➔ Date and time
➔ Time
synchronization
➔ Summer time
➔ Switch
➔ Summer time
➔ Start date
➔ Summer time
➔ Start time
➔ Summer time
➔ End date
➔ Summer time
➔ End time
➔ Language
➔ Temperature unit
➔ Memory readout
Off,
Logic inp1 — 4
Off,
User timed,
Automatic
any date
any time
any date
any time
German, English, French,
Dutch, Spanish, Italian,
Hungarian, Czech,
Swedish, Polish, Danish,
Finnish, Portuguese,
Russian
°C, °F
with diskette,
via RSxxx
Using this parameter (func-
tion), the system clocks of
several recorders can be
simultaneously synchro-
nized.
When a logic input has
been selected and is oper-
ated (transition from "Low
to "High"), then the time
can be synchronized. The
seconds are decisive in the
time change. They are
used for rounding the time
up or down.
Example:
12:55:29 -> 12:55:00
12:55:30 -> 12:56:00
Automatic:
2:00 hrs or 3:00 hrs on the
last Sunday in March or
October
can only be configured if
the changeover (switch) is
set to "User timed"
can only be configured if
the changeover (switch) is
set to "User timed"
can only be configured if
the changeover (switch) is
set to "User timed"
can only be configured if
the changeover (switch) is
set to "User timed"
Determine here how data
are mainly to be read out.
Depending on the selec-
tion, a different value is
made visible via the free
capacity in the status line.