JUMO LOGOSCREEN 500 Operating Instructions Manual page 60

4 Configuration parameters
Synchronization Configuration
➔ Counter/Integrator
time
Period Configuration
➔ Counter/Integrator
Ext. operating Configuration
➔ Counter/Integrator
signal
Weekday Configuration
➔ Counter/Integrator
Daily start time Configuration
➔ Counter/Integrator
Daily end time Configuration
➔ Counter/Integrator
58
All manuals and user guides at all-guides.com
➔ Synchronizat. time
➔ Period
➔ Ext. operating signal
➔ Weekday
➔ Daily start time
➔ Daily end time
any time
(00:00:00)
1min, 2min, 3min, 4min,
5min, 10min, 15min,
30min, 1h, 2h, 3h, 4h, 6h,
8h, 12h
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. al.,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. alarm,
Comb. alarm,
Memory al.,
Error,
Modbus-Flag
Monday,
Tuesday,
Wednesday,
Thursday,
Friday,
Saturday,
Sunday
any time
(06:00:00)
any time
(18:00:00)
Please enter the time at
which the daily, weekly,
monthly or yearly counter/
integrator value is to be
saved.
Only programmable when
the parameter Type is set
to "periodic" for at least
one counter/integrator.
The counter/integrator val-
ues are saved at the se-
lected interval.
Only programmable when
the parameter Type is set
to "external" for at least
one counter/integrator.
Summation of the counter/
integrator values will only
take place if the selected
digital signal is set to "1".
On a change to "0", the
values are saved and reset.
Only programmable when
the parameter Type is set
to "weekly" for at least one
counter/ integrator.
The counter/integrator val-
ues are stored on the
selected day on reaching
the synchronization time.
Only programmable when
the parameter Type is set
to "daily from-to" for at
least one counter/integra-
tor.
Only programmable when
the parameter Type is set
to "daily from-to" for at
least one counter/
integrator.