3.8 Text input
Input
The configurable texts can be input either through the setup program or di-
options
rectly on the instrument. This section describes the input on the instrument.
The display below is shown when a text (e. g. Configuration ➔ Texts) is select-
Character
selection
ed at the configuration level for editing by using
After the character to be altered has been selected and the switch made to
character set matrix, the cursor is positioned on the current character in the
character set matrix.
Character input
The softkeys change their function, as can be seen from the picture below:
After the entire text has been input, it can either be entered or all alterations
cancelled:
h Confirm text with
or
h cancel text input with
All manuals and user guides at all-guides.com
Select the character to be altered using the softkeys
E
D
3 Operation and visualization
E
Switch to character set matrix
Select new character
.
Enter character
43